Lapidary Equipment & Supplies

For over 50 years, serious lapidaries have considered LORTONE the standard for performance and durability. Located in Mukilteo, Washington, north of Seattle, LORTONE has a long history of producing high value, economical...

Part #001-100 -- for use on  33B, 3-1.5B, and 45C Tumblers only  33B, 3-1.5, 45C Motor Pulley

A 1lb (454g) of mixed rough gemstones suitable for lapidary tumbling. One bag is a sufficient load for a 3lb tumbler barrel. This is a natural stone product and the photograph is will give you an idea of some of the stones...

140 grit -medium/fine- diamond-coated sawblades are made by electroplating diamond particles onto piano wire. Our diamond blades are the best quality available at prices well below the competition. Our manufacturer offers a...

Diamonds are ground into a powder using a process called micronization. In micronization, a special fluid or gas breaks down the solid diamonds into powdered form, and produces many tiny grains of the same size. The diamond...

Diamonds are ground into a powder using a process called micronization. In micronization, a special fluid or gas breaks down the solid diamonds into powdered form, and produces many tiny grains of the same size. The diamond...

Diamonds are ground into a powder using a process called micronization. In micronization, a special fluid or gas breaks down the solid diamonds into powdered form, and produces many tiny grains of the same size. The diamond...

Diamonds are ground into a powder using a process called micronization. In micronization, a special fluid or gas breaks down the solid diamonds into powdered form, and produces many tiny grains of the same size. The diamond...

Diamonds are ground into a powder using a process called micronization. In micronization, a special fluid or gas breaks down the solid diamonds into powdered form, and produces many tiny grains of the same size. The diamond...

Diamonds are ground into a powder using a process called micronization. In micronization, a special fluid or gas breaks down the solid diamonds into powdered form, and produces many tiny grains of the same size. The diamond...

Diamonds are ground into a powder using a process called micronization. In micronization, a special fluid or gas breaks down the solid diamonds into powdered form, and produces many tiny grains of the same size. The diamond...

Diamonds are ground into a powder using a process called micronization. In micronization, a special fluid or gas breaks down the solid diamonds into powdered form, and produces many tiny grains of the same size. The diamond...

Our free-standing gravity feed water supply works with any lapidary arbor. Includes tank, valve, and tubing.

For dry tumbling operations on metal or stone. Medium grind (1/16”) for use with compounds.

High quality compound for bright  finishes. Use 1 tbsp per gallon of water. Also available in 5 lb quantities. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

Use these plastic pellets to cushion fragile stones when tumbling in a rotary tumbler or as a filler. The pellets are about 3/16" (4mm) in diameter and float for easy separation from rock. They can be reused multiple times...

Use these plastic pellets to cushion fragile stones when tumbling in a rotary tumbler or as a filler. The pellets are about 3/16" (4mm) in diameter and float for easy separation from rock. They can be reused multiple times...

Excellent for polishing brass, bronze and gold in dry tumbling operations. Impregnated with just the right amount of red jeweller’s rouge for a super shine. Available in larger quantities PLEASE CALL THE STORE AT...

The best for your machine. Sturdy cast aluminum heads machined to run flat and true. Resilient rubber face. Note: If you plan to use it on the left side of your machine-get left hand threads, the right side-get right hand...

The best for your machine. Sturdy cast aluminum heads machined to run flat and true. Resilient rubber face. Note: If you plan to use it on the left side of your machine-get left hand threads, the right side-get right hand...

The best for your machine. Sturdy cast aluminum heads machined to run flat and true. Resilient rubber face. Note: If you plan to use it on the left side of your machine-get left hand threads, the right side-get right hand...

The best for your machine. Sturdy cast aluminum heads machined to run flat and true. Resilient rubber face. Note: If you plan to use it on the left side of your machine-get left hand threads, the right side-get right hand...

The best for your machine. Sturdy cast aluminum heads machined to run flat and true. Resilient rubber face. Note: If you plan to use it on the left side of your machine-get left hand threads, the right side-get right hand...

The best for your machine. Sturdy cast aluminum heads machined to run flat and true. Resilient rubber face. Note: If you plan to use it on the left side of your machine-get left hand threads, the right side-get right hand...

Replacement rubber face for cast aluminum polishing heads.

The best for your machine. Sturdy cast aluminum heads machined to run flat and true. Resilient rubber face. Note: If you plan to use it on the left side of your machine-get left hand threads, the right side-get right hand...

The best for your machine. Sturdy cast aluminum heads machined to run flat and true. Resilient rubber face.                   Note:...

Tin Oxide rock tumbler polish is used for STEP 4 of the rock tumbling process. It was a favorite polishes used in the early days of rock tumbling. Lots of people still use it today. It does a great job on all varieties of...

Replacement outer metal barrel lid for standard Lortone 1.5 and 3lb barrels. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

Replacement barrel washer for Lortone standard rotary tumblers. Used to help secure barrel lid. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

This is metal outer lid completes the watertight seal on Lortone's 6-pound and 12-pound rock tumbler barrels. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

Replacement outer metal lid for Lortone standard 4lb rotary barrel. This barrel usually fits 45C model tumblers PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

Replacement knurled barrel nut for Lortone standard rotary tumblers. Used to secure barrel lid and rests on the barrel guide to act as a stabilizer during rotation. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING...

3 REQUIRED PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

Model QT6/ QT66/ QT 12 Replacement Drum Boot Gasket 240-012  PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

Lortone bearings are easy to replace. First remove the belt. Then remove the retaining ring from the end of the shaft, push the shaft into the case, pull out the old bearing, slide in the new bearing and reassemble. Repeat...

1. required Lortone bearings are easy to replace. First remove the belt. Then remove the retaining ring from the end of the drive shaft, push the shaft into the case, pull out the old bearing, slide in the new bearing and...

This is the rubber cover that goes over the metal lid on Lortone 4.5-pound tumbler barrel. Fits the barrels on Lortone Model 45C tumbler. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING...