since 1976
ATTENTION METALSMITHS… Need to move metal in a very careful and precise way? Now it’s easier with the NEW Whaley Sliding Hammer. This revolutionary tool has a slender, hollow hammer head which holds a long punch...
Stamp Guides™ makes it easy to space out letters, stamp in a straight line or curve, and stamp Mandalas and other intricate patterns. To use the Straight or Circle guides, simply stick a guide to your blank, line up...
This new metal cutting shear, designed by Jay Whaley, solves the problem of cutting square edges on bezel wire! Using the guide attached to the blade, rest your bezel wire up against the ridge of the guide and cut! A nice...
This 3-piece set of replacement rivet punches are for use with the Whaley Sliding Hammer (Part #: HAM-101.00).
This 4-piece set of replacement round/domed-end punches are for use with the Whaley Sliding Hammer (Part #: HAM-101.00).
This 3-piece set of replacement punches are for use with the Whaley Sliding Hammer (Part #: HAM-101.00)
Smooth steel oval mandrel is designed for bracelets with a taper from 2-1/8" x 3" to 1-1/4" x 1-3/8". Length 15". Weighs 7.1lbs.
Produce jump rings quickly and easily with this time-saving device. Coil your wire around one of the twenty mandrels (in the diameters 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12 mm)...
For bending metal strips up to 1 1/2" wide This set includes ImpressArt Bracelet Bending Bar (7) Aluminum Bracelet Blanks, 5/8" x 6", 14...
For stamping soft metals including aluminum, pewter, alkeme, copper, brass, and nickel silver Includes full alphabet letters "a-z" and "?" symbol Classic sans serif font, similar to...
This innovative tool creates unique, one of a kind textures using your metal stamps as texture heads. To use, simply insert a ImpressArt 6mm stamp into the head, tighten the handle, and stamp repeatedly. Note the Texture...
Steel sinusoidal stakes allow the user to form anticlastic shapes using a plastic forming hammer. Length: 9".
Anticlastic pliers are similar to synclastic but produce a curve in opposite ways in two directions (saddle-shaped). Produces a fine, finished product in a fraction of the time without having to use a dapping tool. Total...
Synclastic pliers put a curve toward the same side in all directions. Create a bracelet in minutes, not hours. Also makes rings, bangles and is indispensable in doing jewelry repair. Length 8".
Uses Shape bracelets and make curves in metal Features Length: 6" Nylon jaws protect the surface from nicking and marring Nylon jaw replacements...
For bending metal strips up to 1 1/2" wide
The StudioFlux Bench Pin, by Thomas Mann, gives the maximum amount of support needed for sucessful sawing. Unlike standard bench pins, the StudioFlux Bench Pin is designed to be utilized on top of your workbench, giving you...
TierraCast's long-standing commitment to consistency of product, delivery and customer support has been the foundation of our reputation as a valued vendor partner in the growing bead & jewelry trade. Whether working...
This solid carbon steel dapping cube measures 1 x 1 x 1 inch. Perfect for shaping soft metal and wax, this cube has 12 depressions that range in size from 1/8 to 1/2 inch.
With our new Steel Riveting Block, there is no more guesswork on the length of wire to be cut. Use the holes at the top to pre-cut the perfect length of wire for your projects. The holes in the middle are about 1.8mm deep,...
Made of hardwood to prevent marring the 7 depressions have a smooth finish and include the following diameters which are all 1/2 deep: 2-1/4 1-3/4 1-1/2 1-1/4 1 7/8 3/4. The 3 x 3 steel block is affixed and flush with...
Round Jump Rings Maker, 10 mm, 12 mm, 14 mm, 16 mm (0.4 in, 0.47 in, 0.55 in, 0.63 in) The exclusive Beadalon Jump Ring Maker comes in different configurations so you can make just the size you need. Try coiling vivid...
Oval Jump Ring Maker 4 mm x 6 mm, 5 mm x 7 mm, 6 mm x 8 mm (0.157 in x 0.236 in, 0.2 in x 0.276 in, 0.236 in x 0.315 in) The exclusive Beadalon Jump Ring Maker comes in different configurations so you can make just the size...
The Coiling Gizmo Econo Winder comes with a manually mounted base with screw, two different sized rods, and instructions. Just like the Deluxe version, crank wire around the rod to make various coiled springs and beads. This...
This new, easy-to-use benchtop drill press is tiny, but powerful enough to use for all of your drilling projects. With a platform measuring only 6-3/4" x 6-3/4", it is space-saving as well as...
Made of smoothly finished hardwood, this U-Channel Hardwood Block includes six hammer punches with corresponding head diameters to work with the six u-channels in the block. Widths of U-channels and hammer punches...
Made of hardwood and hand sanded to a smooth finish. Use this 2-3/4 block when working with fine or soft metals and marring could be an issue. - Four round depressions: 2-1/4 2-1/8 1-7/8 and 1-3/4 diameters. - Five...
This set not only cuts flat discs but also forms and cuts cone or domed shaped discs. It comes with a small disc cutter and 21 punches -7 flat 7 concave and 7 convex- all nicely packaged in a wood storage box...
Large Shaping Block features TWO round 5 depressions -23 and 28mm deep- and four u-channel grooves along the length of two sides. Made of rosewood this block will hold up to heavy gauge metals without the risk of...
Made of hard wood for non-marring each punch is gently domed with a smooth finish. 3-3/4 in length the diameters include: 2 1-1/2 1 3/4 and 5/8...
Made of hard wood to prevent scratching or marring, this sturdy forming block has seven round depressions. Measures 6.25" x 4" x 1.25...
Made of hard wood to prevent scratching or marring, this sturdy forming block has seven teardrop depressions. Measures 6.25" x 4" x 1.25...
This high quality hardwood forming block is great for bending and forming without the risk of marring. Lighter weight and less expensive than the steel version, the large grooves consist of 3 half round (1-1/4",...
Metal Forming: Eurotool Bench Block Steel and Rubber 4”x4” BEN-404.00 Extremely handy for filing hammering and other uses this rubber block is made of a tough firm vulcanized rubber to give the user...
Black plastic ring stick has large easy-to-read white markings which measure rings from size 1 to 15 by quarter sizes. This accurate and economical ring stick is great for use on glass showcases...