since 1976
For dry tumbling operations on metal or stone. Medium grind (1/16”) for use with compounds.
Use these plastic pellets to cushion fragile stones when tumbling in a rotary tumbler or as a filler. The pellets are about 3/16" (4mm) in diameter and float for easy separation from rock. They can be reused multiple times...
SILICON CARBIDE: (Rating, MOHS 9.5) A fused, hard crystalline abrasive. Fast cutting with good crystal breakdown when used to lap either high or low tensile strength material. It is well suited for rough lapping operations...
"Tumbler grit" is a silicon carbide powder that is much harder than the types of rocks that are commonly tumbled. If it is tumbled in a barrel with rock and water the abrasion caused by the grit particles rounds the sharp...
SILICON CARBIDE: (Rating, MOHS 9.5) A fused, hard crystalline abrasive. Fastcutting with good crystal breakdown when used to lap either high or low tensile strengthmaterial. It is well suited for rough lapping operations...
Used for STEP 4 of the tumbling process. This aluminum oxide polish puts a bright finish on agate, jasper, petrified wood and other commonly tumbled material. We use four tablespoons for every three pounds of barrel...
This item is available in larger quantities PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS
"Tumbler grit" is a silicon carbide powder that is much harder than the types of rocks that are commonly tumbled. If it is tumbled in a barrel with rock and water the abrasion caused by the grit particles rounds the...