Polishing Tools & Supplies

Highly polished tool steel 2 straight burnishers with hardwood handles and metal ferrules for long life. Each burnisher is oval shaped for smoothing metals or bezel setting around stones.

Highly polished tool steel 2 curved burnishers with hardwood handles and metal ferrules for long life. Each burnisher is oval shaped for smoothing metals or bezel setting around stones.

Finger Pro is the ultimate finger protection from cuts burns and abrasions. Because Finger Pro is thin and tough it allows the user to handle small articles much better than conventional cots or gloves. This unique tape...

For dry tumbling operations on metal or stone. Medium grind (1/16”) for use with compounds.

Use these plastic pellets to cushion fragile stones when tumbling in a rotary tumbler or as a filler. The pellets are about 3/16" (4mm) in diameter and float for easy separation from rock. They can be reused multiple times...

Rust proof jewellery mixture with a mirror polished surface. Includes flattened balls, diagonals and pins. Use with burnishing solution.

The best for your machine. Sturdy cast aluminum heads machined to run flat and true. Resilient rubber face. Note: If you plan to use it on the left side of your machine-get left hand threads, the right side-get right hand...

The best for your machine. Sturdy cast aluminum heads machined to run flat and true. Resilient rubber face. Note: If you plan to use it on the left side of your machine-get left hand threads, the right side-get right hand...

The best for your machine. Sturdy cast aluminum heads machined to run flat and true. Resilient rubber face. Note: If you plan to use it on the left side of your machine-get left hand threads, the right side-get right hand...

The best for your machine. Sturdy cast aluminum heads machined to run flat and true. Resilient rubber face. Note: If you plan to use it on the left side of your machine-get left hand threads, the right side-get right hand...

Replacement rubber face for cast aluminum polishing heads.

The best for your machine. Sturdy cast aluminum heads machined to run flat and true. Resilient rubber face. Note: If you plan to use it on the left side of your machine-get left hand threads, the right side-get right hand...

The best for your machine. Sturdy cast aluminum heads machined to run flat and true. Resilient rubber face.                   Note:...

Tin Oxide rock tumbler polish is used for STEP 4 of the rock tumbling process. It was a favorite polishes used in the early days of rock tumbling. Lots of people still use it today. It does a great job on all varieties of...

Replacement barrel washer for Lortone standard rotary tumblers. Used to help secure barrel lid. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

This is metal outer lid completes the watertight seal on Lortone's 6-pound and 12-pound rock tumbler barrels. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

Replacement outer metal lid for Lortone standard 4lb rotary barrel. This barrel usually fits 45C model tumblers PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

Replacement knurled barrel nut for Lortone standard rotary tumblers. Used to secure barrel lid and rests on the barrel guide to act as a stabilizer during rotation. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING...

1. required Lortone bearings are easy to replace. First remove the belt. Then remove the retaining ring from the end of the drive shaft, push the shaft into the case, pull out the old bearing, slide in the new bearing and...

This is the rubber cover that goes over the metal lid on Lortone 4.5-pound tumbler barrel. Fits the barrels on Lortone Model 45C tumbler. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING...

This is the inner metal lid with threaded stud for Lortone's Model 45C 4.5-pound tumbler barrel. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

The inner metal lid with a threaded stud for Lortone's 3lb and 1.5lb barrels. Fits the barrels on Lortone Model 3A and 33B tumblers. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

A rubber boot gasket that makes Lortone's 3lb and 1.5lb barrels watertight and quieter. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

SILICON CARBIDE: (Rating, MOHS 9.5) A fused, hard crystalline abrasive. Fast cutting with good crystal breakdown when used to lap either high or low tensile strength material. It is well suited for rough lapping operations...

SILICON CARBIDE: (Rating, MOHS 9.5) A fused, hard crystalline abrasive. Fast cutting with good crystal breakdown when used to lap either high or low tensile strength material. It is well suited for rough lapping operations...

SILICON CARBIDE: (Rating, MOHS 9.5) A fused, hard crystalline abrasive. Fast cutting with good crystal breakdown when used to lap either high or low tensile strength material. It is well suited for rough lapping operations...

SILICON CARBIDE: (Rating, MOHS 9.5) A fused, hard crystalline abrasive. Fast cutting with good crystal breakdown when used to lap either high or low tensile strength material. It is well suited for rough lapping operations...

"Tumbler grit" is a silicon carbide powder that is much harder than the types of rocks that are commonly tumbled. If it is tumbled in a barrel with rock and water the abrasion caused by the grit particles rounds the sharp...

"Tumbler grit" is a silicon carbide powder that is much harder than the types of rocks that are commonly tumbled. If it is tumbled in a barrel with rock and water the abrasion caused by the grit particles rounds the sharp...

SILICON CARBIDE: (Rating, MOHS 9.5) A fused, hard crystalline abrasive. Fastcutting with good crystal breakdown when used to lap either high or low tensile strengthmaterial. It is well suited for rough lapping operations...

Tin Oxide rock tumbler polish is used for STEP 4 of the rock tumbling process. It was a favorite polishes used in the early days of rock tumbling. Lots of people still use it today. It does a great job on all varieties of...

This item is available in larger quantities. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

SILICON CARBIDE: (Rating, MOHS 9.5) A fused, hard crystalline abrasive. Fastcutting with good crystal breakdown when used to lap either high or low tensile strengthmaterial. It is well suited for rough lapping operations...

SILICON CARBIDE: (Rating, MOHS 9.5) A fused, hard crystalline abrasive. Fastcutting with good crystal breakdown when used to lap either high or low tensile strengthmaterial. It is well suited for rough lapping operations...

SILICON CARBIDE: (Rating, MOHS 9.5) A fused, hard crystalline abrasive. Fast cutting with good crystal breakdown when used to lap either high or low tensile strength material. It is well suited for rough lapping operations...

 Lortone QT motors are easy to replace. Just open the case, remove the belt guard, remove the belt, remove the two motor-mounting screws, replace the motor, replace the screws, replace the belt, replace the guard and...

Motors for the Lortone tumblers generally last a very long time - running many years without needing replacement. But, if you tumble a lot you might need a new motor. They are easy to replace if you know how to use crimp...

This metal barrel guide comes with the bolt, nut and washer needed for installation PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS