Tools & Supplies

#61/ 0.0390 in/ 0.9906 mmMade of high quality steel, carefully tempered and accurately ground to size. All drills have straight shanks and are perfectly finished to assure quick, smooth and clean drilling.

#56/ 0.0465 in / 1.1811 mmMade of high quality steel, carefully tempered and accurately ground to size. All drills have straight shanks and are perfectly finished to assure quick, smooth and clean drilling.

#55/ 0.0520 in/ 1.3208 mmMade of high quality steel, carefully tempered and accurately ground to size. All drills have straight shanks and are perfectly finished to assure quick, smooth and clean drilling.

Create holes for wire rivets in 18, 16, 14 and 12 gauge. Punch holes up to 18 gauge metal sheets or multiple metal sheets together with ease.

With our new Steel Riveting Block, there is no more guesswork on the length of wire to be cut. Use the holes at the top to pre-cut the perfect length of wire for your projects. The holes in the middle are about 1.8mm deep,...

With two small rectangular faces, the raising hammer is used to create a seamless form without thinning the metal. Head length: 4-1/2". Width: 7/8".

Overall strength: highUse: multi-purpose; will bond to just about any surfaceDrying time: 24 to 72 hours for maximum strengthColor once dry: clear but cloudyJewelry application: This glue is waterproof and flexible once it's...

Finger Pro is the ultimate finger protection from cuts burns and abrasions. Because Finger Pro is thin and tough it allows the user to handle small articles much better than conventional cots or gloves. This unique tape...

Made of hardwood to prevent marring the 7 depressions have a smooth finish and include the following diameters which are all 1/2 deep: 2-1/4 1-3/4 1-1/2 1-1/4 1 7/8 3/4. The 3 x 3 steel block is affixed and flush with...

Black 3/32 replacement punch for 2 hole thumbscrew punch PUN-400.00.

For dry tumbling operations on metal or stone. Medium grind (1/16”) for use with compounds.

Rust proof jewellery mixture with a mirror polished surface. Includes flattened balls, diagonals and pins. Use with burnishing solution.

The best for your machine. Sturdy cast aluminum heads machined to run flat and true. Resilient rubber face. Note: If you plan to use it on the left side of your machine-get left hand threads, the right side-get right hand...

The best for your machine. Sturdy cast aluminum heads machined to run flat and true. Resilient rubber face. Note: If you plan to use it on the left side of your machine-get left hand threads, the right side-get right hand...

The best for your machine. Sturdy cast aluminum heads machined to run flat and true. Resilient rubber face. Note: If you plan to use it on the left side of your machine-get left hand threads, the right side-get right hand...

The best for your machine. Sturdy cast aluminum heads machined to run flat and true. Resilient rubber face. Note: If you plan to use it on the left side of your machine-get left hand threads, the right side-get right hand...

Replacement rubber face for cast aluminum polishing heads.

The best for your machine. Sturdy cast aluminum heads machined to run flat and true. Resilient rubber face.                   Note:...

These soft rubber drums expand in use to hold sanding belts firmly in place. Soft, pliable rubber blends to the stone yet still has a firm feel. Max RPM 1750. Comes with reducer bushings for all popular shaft sizes. ...

Replacement outer metal barrel lid for standard Lortone 1.5 and 3lb barrels. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

Replacement barrel washer for Lortone standard rotary tumblers. Used to help secure barrel lid. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

This is metal outer lid completes the watertight seal on Lortone's 6-pound and 12-pound rock tumbler barrels. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

Replacement outer metal lid for Lortone standard 4lb rotary barrel. This barrel usually fits 45C model tumblers PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

Replacement knurled barrel nut for Lortone standard rotary tumblers. Used to secure barrel lid and rests on the barrel guide to act as a stabilizer during rotation. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING...

3 REQUIRED PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

Lortone bearings are easy to replace. First remove the belt. Then remove the retaining ring from the end of the shaft, push the shaft into the case, pull out the old bearing, slide in the new bearing and reassemble. Repeat...

1. required Lortone bearings are easy to replace. First remove the belt. Then remove the retaining ring from the end of the drive shaft, push the shaft into the case, pull out the old bearing, slide in the new bearing and...

This is the rubber cover that goes over the metal lid on Lortone 4.5-pound tumbler barrel. Fits the barrels on Lortone Model 45C tumbler. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING...

This is the inner metal lid with threaded stud for Lortone's Model 45C 4.5-pound tumbler barrel. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

The inner metal lid with a threaded stud for Lortone's 3lb and 1.5lb barrels. Fits the barrels on Lortone Model 3A and 33B tumblers. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

A rubber boot gasket that makes Lortone's 3lb and 1.5lb barrels watertight and quieter. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

This is the inner metal lid with threaded stud for Lortone 6-pound and 12-pound tumbler barrels. Fits the barrels on Lortone Model QT6, QT66 and QT12 tumblers PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING...

Lortone bearings are easy to replace. First remove the belt. Then remove the retaining ring from the end of the shaft, push the shaft into the case, pull out the old bearing, slide in the new bearing and reassemble. Repeat...

SILICON CARBIDE: (Rating, MOHS 9.5) A fused, hard crystalline abrasive. Fast cutting with good crystal breakdown when used to lap either high or low tensile strength material. It is well suited for rough lapping operations...

SILICON CARBIDE: (Rating, MOHS 9.5) A fused, hard crystalline abrasive. Fast cutting with good crystal breakdown when used to lap either high or low tensile strength material. It is well suited for rough lapping operations...

SILICON CARBIDE: (Rating, MOHS 9.5) A fused, hard crystalline abrasive. Fast cutting with good crystal breakdown when used to lap either high or low tensile strength material. It is well suited for rough lapping operations...

SILICON CARBIDE: (Rating, MOHS 9.5) A fused, hard crystalline abrasive. Fast cutting with good crystal breakdown when used to lap either high or low tensile strength material. It is well suited for rough lapping operations...

"Tumbler grit" is a silicon carbide powder that is much harder than the types of rocks that are commonly tumbled. If it is tumbled in a barrel with rock and water the abrasion caused by the grit particles rounds the sharp...

SILICON CARBIDE: (Rating, MOHS 9.5) A fused, hard crystalline abrasive. Fastcutting with good crystal breakdown when used to lap either high or low tensile strengthmaterial. It is well suited for rough lapping operations...