Tumbler Parts

Part #001-100 -- for use on  33B, 3-1.5B, and 45C Tumblers only  33B, 3-1.5, 45C Motor Pulley

Replacement outer metal barrel lid for standard Lortone 1.5 and 3lb barrels. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

Replacement barrel washer for Lortone standard rotary tumblers. Used to help secure barrel lid. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

This is metal outer lid completes the watertight seal on Lortone's 6-pound and 12-pound rock tumbler barrels. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

Replacement outer metal lid for Lortone standard 4lb rotary barrel. This barrel usually fits 45C model tumblers PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

Replacement knurled barrel nut for Lortone standard rotary tumblers. Used to secure barrel lid and rests on the barrel guide to act as a stabilizer during rotation. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING...

3 REQUIRED PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

Model QT6/ QT66/ QT 12 Replacement Drum Boot Gasket 240-012  PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

Lortone bearings are easy to replace. First remove the belt. Then remove the retaining ring from the end of the shaft, push the shaft into the case, pull out the old bearing, slide in the new bearing and reassemble. Repeat...

1. required Lortone bearings are easy to replace. First remove the belt. Then remove the retaining ring from the end of the drive shaft, push the shaft into the case, pull out the old bearing, slide in the new bearing and...

This is the rubber cover that goes over the metal lid on Lortone 4.5-pound tumbler barrel. Fits the barrels on Lortone Model 45C tumbler. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING...

This is the inner metal lid with threaded stud for Lortone's Model 45C 4.5-pound tumbler barrel. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

The inner metal lid with a threaded stud for Lortone's 3lb and 1.5lb barrels. Fits the barrels on Lortone Model 3A and 33B tumblers. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

A rubber boot gasket that makes Lortone's 3lb and 1.5lb barrels watertight and quieter. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

This is the inner metal lid with threaded stud for Lortone 6-pound and 12-pound tumbler barrels. Fits the barrels on Lortone Model QT6, QT66 and QT12 tumblers PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING...

Lortone bearings are easy to replace. First remove the belt. Then remove the retaining ring from the end of the shaft, push the shaft into the case, pull out the old bearing, slide in the new bearing and reassemble. Repeat...

 Lortone QT motors are easy to replace. Just open the case, remove the belt guard, remove the belt, remove the two motor-mounting screws, replace the motor, replace the screws, replace the belt, replace the guard and...

Motors for the Lortone tumblers generally last a very long time - running many years without needing replacement. But, if you tumble a lot you might need a new motor. They are easy to replace if you know how to use crimp...

This metal barrel guide comes with the bolt, nut and washer needed for installation PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

This barrel guide comes with the hardware needed for installation. It fits the model QT6, QT66 and QT12 Lortone tumblers. PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

Replacing a belt on a Lortone Model 33B or 45C tumbler is easy. Just use a screwdriver to open the case, loosen the screws that hold the motor to the case, stretch the belt over the pulleys, move the motor until the belt is...

Model QT6/ QT66/ QT12 Replacement Drive Belt 210-11  PLEASE CALL THE STORE AT 1-604-987-5311 FOR SHIPPING DETAILS

Replacing the belt on a Lortone Model 3A tumbler is an easy job. Use a screwdriver to open the case, loosen the screws that hold the motor to the case, stretch the belt over the two pulleys, move the motor until the belt is...

This is a large 12-pound capacity barrel to fit the Lortone Model QT12 rock tumbler. This QT-12 barrel will also work on a QT-66 base. It includes the soft rubber barrel, two-piece metal lid, rubber lid liner, washer and...

This is a three-pound capacity replacement barrel to fit the Lortone Model 3A and Lortone Model 33B rock tumblers. It includes the rubber barrel, two-part metal lid, rubber lid liner, washer and plastic knob. TIP: For best...

This barrel fits the Lortone Model 45C rock tumbler. This 4.5-pound capacity barrel includes the soft rubber barrel, two-piece metal lid, rubber lid liner, washer and plastic knob. TIP: Get an extra barrel and dedicate it to...

A complete 6-pound barrel designed for Lortone Model QT-6 and QT-66 tumblers but will also work on a QT-12 base. It is a soft rubber barrel with all the components to start using it. TIP: Get an extra barrel and dedicate it...

Patented Lortone barrels made of long wearing rubber with our patented water tight seal. Ten sided interiors on 4lb and larger models Not for use with harsh solvents or detergents.   PLEASE CALL THE STORE AT...